Flagstone Paving & Building Supplies | Bricks, Blocks and associated products
paving supplies kent, building supplies kent, builders merchants kent, paving kent, Fencing kent, Indian Sandstone kent, Aggregates kent,Flagstone, Natural stone kent, Bricks kent,
paving supplies kent, building supplies kent, builders merchants kent, paving kent, Fencing kent, Indian Sandstone kent, Aggregates kent,Flagstone, Natural stone kent, Bricks kent,
2047
page-template-default,page,page-id-2047,ajax_leftright,page_not_loaded,,qode_grid_1300,footer_responsive_adv,hide_top_bar_on_mobile_header,qode-content-sidebar-responsive,qode-theme-ver-9.1.3,wpb-js-composer js-comp-ver-4.11.2.1,vc_responsive
Bricks, Blocks and associated products
Bricks
Here at Flagstone’s we are constantly updating and improving our brick stocks, the pictures below show a small portion of our Bricks that are always kept in stock with low prices on offer across the range.
We also regularly have “brick saver deals” through end of line or “trial bricks” that at are amazing prices these are not shown on the website due to their fast moving nature – please visit our depot for more information or view our ebay store.
Free Brick Matching Service
To match your bricks, simply E-Mail: info@flagstonepaving.co.uk and upload two images of the bricks that you wish to match
Take one photograph showing approximately 20 bricks, 4 rows by 5, then take a photograph that shows the detail from a single brick.
To help us aid identification please could you supply the measurements of any of your bricks in metric or imperial.
Bespoke brick cutting service available – Cutting, Brick slips, shapes

West Hoathly Medium Multi stock
Stratford Yellow imperial stock
Staffordshire Perforated Blue
Single Bullnosed Blue Bn1.2
Double Bullnosed blues Bn2.2

Reclaimed Stocks
Reclaimed Red or Yellow Imperial stock bricks are available from stock
Can be purchased in separate colours or mixed
Please enquire about availability

Red creasing tiles
Plain clay tile without nibs
Used for sills, cappings and other decorative purposes
Shedding water and preventing dampness in walls
Visual effect when used to construct fine details in brick and stone walls
No nibs, no holes, and no cambers
Size 265mm x 165mm x 12mm
Lightweight Thermal Blocks

100mm Ytong blocks 3.6n
100mm Ytong Lightweight Blocks
(10 blocks per metre)
Length: 440 mm
Depth: 215 mm
Thickness: 100mm
Pack Size: 72

215mm Ytong blocks 3.6n
215mm Ytong Lightweight Blocks
(10 blocks per metre)
Length: 440 mm
Depth: 215 mm
Thickness: 215mm
Pack Size: 32

100mm Medium dense concrete blocks
100mm Medium dense concrete blocks 7.3N
Lighter in weight than standard concrete blocks by up to 8kg per block, making them easier to handle and lay!
Same 7.3N strength
(10 blocks per metre)
Length: 440 mm
Depth: 215 mm
Thickness: 100mm
Pack Size: 90

215mm Hollow Concrete Block
215mm Hollow Concrete Block 7.3N
Can be used for the construction of high strength retaining walls, for external walls, cavity walls, partition walls and party walls.
(10 blocks per metre)
Length: 440 mm
Depth: 215 mm
Thickness: 215mm
Pack Size: 50
Brick & Block accessories

Terracotta Air Bricks
Available in;
215mm x 65mm Red
215mm x 65mm Buff
215mm x 140mm Red
215mm x 215mm Red

Telescopic Under Floor Vent
Used in conjunction with the combination airbrick to achieve approximately 6600mm of free airflow (which complies with the latest building regulations 1985 C4 and the recommendations of the NHBC).
Installed in normal brickwork below the DPC and adjusted to three of four courses as required, or it may be cut down to two courses.

Plastic airbrick
Used in conjunction with the telescopic underfloor vent to provide approximately 6600m2 of free airflow (which complies with the 1985 building regulations and the recommendations of the NHBC) when spaced every 2.2 metres.
The 9″ x 3″ airbricks can be clipped together to obtain required brickwork coursings.

Weep hole vents
A Preformed duct designed to replace a perpendicular mortar joint and to allow water gathered by cavity trays and DPC’s to be discharged through the outer leaf and also to provide ventilation.
To be installed at maximum 1 metre centres (i.e. every fourth perpendicular joint to comply with building regulations. BS5628 part 3 and BS8215. When working to NHBC standards, install at maximum 450mm centres (ie. every other perpendicular joint).

Type 4 housing ties
Available in 200mm and 225mm stainless steel only.
Suitable for masonry cavities in domestic housing up to 2 storeys.

Insulation discs
Used to retain loose insulation in cavity walls.
Universal fitting suits butterfly ties and double triangular ties, specify vertical twist type if required.
56mm diameter.

Frame Ties
Produced from 25 x 2.5mm galvanised mild steel, these ties are ideal for fixing door and window frames to brick or block work.
One end is safe-ended for building in, and the other has two holes in the 50mm upstand to accommodate screws.
100 x 50mm
150 x 50mm

Screw in Frame ties
Universal frame and wall ties for connecting wood frames and masonry to masonry.
Zinc and yellow-passivated.
Requires 8mm plug-in masonry.

Stainless Steel Wallstarters
Wall Starters are the ideal way to join new masonry to existing walls.
It comprises a corrosion resistant stainless channel which is screwed to the existing wall using the plugs and coach screws supplied, and a stainless steel sliding wall tie which will accommodate any common size or type of masonry.
It will resist a wind load of 4.5 kN over 2400mm.
Each pack contains all the necessary fixings to construct a single skin of masonry 2400mm high.

Heavy duty restraint strap
Manufactured from 30mm wide galvanised mild steel to BS2989 Grade G275 (z2) with 6mm pre-punched holes.
When ordering, please specify the overall length of the strap and then specify the position of the bend or if just straight.
Available in
900mm with 100mm bend
1000mm straight

Fibreboard expansion joint filler
Fibreboard expansion joint filler for all your requirements for concrete expansion and movement joints.
General purpose expansion joint filler meeting DOT and BAA specifications
Typical applications would include: concrete paths, foundation slabs, roads and airport runways
It can also be used as a backfill protection board for below ground applications
Available in;
100mm x 2440mm x 12mm
150mm x 2440mm x 12mm

100mm Foam expansion joint filler
100mm Foam expansion joint filler for all your requirements for brick and block work expansion and movement joints.
Ideal low resistance expansion joint filler for brickwork and concrete block work, fully meets the British Standards for movement joints in brickwork
10mm x 100mm x 10m

Damp proof course (DPC)
A heavy embossed polythene DPC manufactured to BS6515, 500mu
Available in;
100mm x 30m rolls
150mm x 30m rolls
225mm x 30m rolls
300mm x 30m rolls
450mm x 30m rolls

Plyload hi performance DPC
Plyload DPC is a bitumen free polymeric sheet.
This DPC is designed to remain effective for the lifetime of the structure.
The product is compatible with all commonly used building materials including mastic, hot applied bituminous damp proof membranes, expanded polystyrene and other insulants.
100mm x 20m rolls

EML Coils
This material acts as a reinforcement for brick and blockwork (stainless steel) and is suitable for partition slabs.
It is easily incorporated in the normal thickness of a sand and cement bed. Manufactured from 26 gauge galvanised mild steel to BS2989: 1982 Grade Z2 G275
Available in;
65mm x 20m coils
115mm x 20m coils
178mm x 20m coils
225mm x 20mm coils

Hessian Frost Blanket
Hessian Frost Blanket is used to cover concrete from frost and can also be used to cover bricks.
Our biodegradable hessian roll is available in 46m.
Concrete and new brickwork are covered by hessian rolls.
1.37m x 46m rolls